Awlgrip D8002 High Build Epoxy Primer is a two component epoxy primer for use where high build and filling is required. This product is not to be used below the waterline.
Features:
- High build, two-part epoxy primer
- Use where high build and filling is required
- Best applied using a paint sprayer
- Not recommended for roll and tip applications
- Best when used over other Awlgrip primers and fairing compounds
- May be applied directly to properly prepared wood or fiberglass
- Best results are obtained when these surfaces are first sealed with 545 Primer
- Suitable for above the waterline only
- Components: 2
- Best when used over other Awlgrip primers and fairing compounds. May be applied directly to properly prepared wood or fiberglass, however best results are obtained when these surfaces are first sealed with 545 Primer
- Gelcoat/Fiberglass: Sand with 100-150 grit paper
- Wood: Smooth sand with 80-100 grit paper
